K-324 Instant Glue Quick Glue Quick Glue Accelerated Curing Agent 502 Rapid Accelerator 500ml/bottle

   K-324

             Quick drying glue accelerator activator

Application of the product

It is mainly used to improve the curing speed of cyanoacrylate adhesives. It can be used both before and after bonding

Use; It is especially suitable for use of cyanoacrylate adhesives after bonding to ensure quick fixation.

Technical parameters

Typical characteristics

useP001-5After accelerating the activator treatment, the curing rate of the adhesive depends on the type of adhesive selected and the material to be bonded.

Use the process

How to use activators after bonding:

1Apply cyanoacrylate glue to the surface of the material to be bonded or fixed.

2, apply the activator to the adhesive by spraying or dripping, and the dosage of the two is1：1。

Surface activation

1, spray, brush or dip to apply a layer of activator to the bonded surface. Before use, the contaminated surface requires special cleaning or degreasing to remove any soluble contaminants.

2Allow enough time for the activator to evaporate under good ventilation conditions until the surface is completely dry(about30second)。

3, after the solvent is dried45Apply Osborne cyanoacrylate glue immediately within seconds.

4, if in45The instant gel was not applied to the activator within seconds and needed to be reusedP001-5Accelerating activators.

Notes:

1Do not mix activator and adhesive in liquid state. Pay attention to fire prevention and ventilation in the place of use.

2, keep away from children.

Plastic bottles500ml/Bottle.    

Storage conditions

1, in a cool and dry place8～28℃Reserve.

2, storage period:24Months.

3, products that have exceeded the shelf life should be confirmed whether there are any abnormalities before use.