HLS-Q9929 Acrylic Structural Adhesive Plastic Metal Glue has good initial adhesion and strong adhesive strength 50ml/piece

               H-Q9929

               Acrylic AB adhesive

1use

 Green red adhesive is a modified acrylic adhesive, which is widely used in the bonding and assembly of industrial products such as plastics, oil tanks, pipelines, elevators, motors, craft accessories, and wood products.

2peculiarity

It cures quickly at room temperature, is easy to use, and has a wide range of applicability. It has strong impact and shear resistance and good weather resistance.

3, performance indicators

Appearance: (A glue) green translucent viscous liquid (B glue) red translucent viscous liquid

 Viscosity: 2000~3500 (cps/25°C)

Specific gravity: 1.00±0.02 (g/cm3, 20°C)

Solid Ingredients: 100%

Curing speed: 3~5 minutes for initial curing time after lamination, 24 hours for complete curing.

Shelf life: 6 months (25°C)

4, how to use

 First, clean the moisture, dust, oil stains, rust spots and other dirt on the surface of the bonded material, and when using manual operation, apply A glue on one side and B glue on the other surface to fit the two adhesive surfaces to each other; or repeatedly apply A glue and B glue on one adhesive surface, and then fit the two sides to each other, and try to rotate and mix when bonding. If the automatic mixing and gluing equipment is used to apply glue, the effect will be better.

 5, precautions

 1Keep the workplace ventilated.

 2Use and store away from fire.

 3Do not mix the two liquids before use.

 4Do not touch this product with skin during operation, and if it touches the skin, rinse it off with soapy water.

 5When storing, it should be placed in a cool place, away from direct sunlight, and the storage temperature should be below 25°C.

 6, packaging specifications

 50ML/Branch. 50 pcs/carton