H-704 Quick Drying Metal Viscose Plastic Glue Quick Drying Hardware Viscose Plastic Glue Instant Adhesive 20g/pc
H-704Quick drying glue seriesOne. characteristic：One-component, cures without he
H-704Quick drying glue seriesOne. characteristic：One-component, cures without he
H-704Quick drying glue series
One. characteristic：One-component, cures without heat, fast bonding, and has strong adhesion.
Two. use：It can bond plastic, rubber, bakelite, metal, wood, ceramic, leather and other products Silicone rubber and thermoplastic elastomer materials are bonded with our H-G110-1 series treatment agent (dry for 3-5 minutes after treatment), which can achieve the breaking strength of silicone rubber and thermoplastic elastomer.
Three. Technical parameters
Model | use | appearance | Viscosity (mpa.s) | density | Adhesion speed (seconds) | Full curing time | Bonding Gap (mm) | Shear Strength (kgf/c㎡) | Operating temperature |
H-704 | TPR, PVC, PC, PS, ABS, plastic, metal, silicone rubber | transparent | 100±20 | 1.05 | ≤ 20 seconds | 24hour | 0.12 | 200 | -50°C to 80°C |
Four. How to use:：
1.Remove dirt, rust, oil, release agent from the surface of the adhesive, and use a clean cloth with alcohol
2.Glue is applied to the product, and the other side of the product is pressed to bond.
3.Generally, the adhesive can be fixed for another 10~60 seconds, and the adhesive cannot be separated or moved in the middle, which will affect the bonding strength.
4.The amount of glue should form a film after bonding, the amount of glue is too small, the adhesion is not enough, the amount of glue is too much, the curing is slow and the bleaching is serious.
Five. wrap: 20g/bottle 1kg/bottle.
