Silicone adhesive ABS glue, neck protector silicone adhesive plastic method

The neck protector uses a silicone elastic arm, which releases the arc that conforms to the natural physiological curvature of the human body, soothes the intervertebral space joints of the cervical spine, fits seamlessly, and wears without pressure, helping you say goodbye to cervical spine pain and allowing people to work with more peace of mind. But you know that there is one thing indispensable for the production of neck guards, that is: H-G3002 silicone adhesive ABS plastic glue.

Neck protectorSilicone adhesive ABS glueHow to use H-G3002

H-G3002 is a room temperature vulcanized slow-drying adhesive that is relatively simple to use

1. Clean the surface: remove the stains on its surface to prevent it from affecting the bonding effect;

2. Glue: Apply H-G3002 evenly to the cleaned object to be glued;

3. Bonding process: the two substrates to be glued are glued and fixed;

4. Potting process: make it cure naturally, and the extruded glue will be glued within 2 minutes, and the adhesive strength will be reduced after the timeout;

5. Apply RTV silicone glue H-G3002 and try to control it evenly within 2mm. Bond the other material to be bonded to the other side to facilitate venting. Then apply the pressure to the metal block flat.

6. Wait for it to cure: It usually takes 24 hours to fully cure.

The neck protector is the neck massager production using soft silicone to contact the human skin, silicone glue bonding silicone and the ABS of the neck protector has become its biggest demand, H-G3002 neck protector glue makes your neck protector more comfortable, today you massage your neck.